DXpedition preparations, parts list and rough measurements for T2LT antenna, and a possible cheap and light power supply

As I am hoping to order a 100 meter drum of coax, specifically RG58, I have taken some measurements for the T2LT antenna, I may make a second antenna for home if the design proves itself in service, the measurements are those used by YouTube user UKCBTV, a fellow Charlie Tango station (though can't remember the callsign), with a working centre frequency of around 27.500MHz, should cover the legal 80 channels with little in the way of trouble.

Another thing I found while watching UKCBTV's videos was his excellent idea of a portable power supply, which uses 10 1.2v rechargeable batteries, which range in capacities up to 2500mAh, that would be roughly 25Ah at 12v DC, so something I may cobble together, as well as get hold of a decent battery charger plus some new batteries, he also fitted a volt meter, a good idea to ensure voltage is stable and a cigarette lighter line socket, the battery box and cigarette lighter line socket can be sourced from Maplin Electronics, the voltmeter appears to be an eBay purchase.  This idea was compared to the Midland 77-805 Portapak CB radio, which had a battery box with it, handhelds are another option but the battery life in most is usually pretty dire and the rubber duck antenna is usually hopeless.

The current draw for my Midland Alan 78+ Multi B is around 1.1A on TX, presumably at full modulation, the 42 handheld (which includes a car adaptor) is slightly shy of 1A on TX, the President Grant 2 is 3A on TX with modulation. my Moonraker FA5000, which I now hardly use, I do not know the current draw for as I've lost the manual.

So if I can get the T2LT antenna built and tested in the next couple of weeks, I can focus on a suitable power supply, the battery pack idea above from UKCBTV sounds ideal and is cheaper and lighter than the car jump starter I was originally going to use and will get me started, a telescopic fibreglass mast, and, importantly, a shelter, a collapsible tent may suffice, and a means to carry it all on my back while riding my scooter (I don't have a car yet) then I'm  all good to go, and can get on the air portable at Tan Hill hopefully come August time, if you're on air the day I am up there then we may hear each other on air that day, I'll be using the usual callsign

So, progress in the right direction, power lead, a possible electrical supply, and the measurements for the T2LT written down.

73 de 26CT730

Planning a DXpedition to Tan Hill

I am planning a DXpedition to Tan Hill, home of the highest pub in England, my plan is to take a rig, battery rated around 10Ah, may get a bigger one (my scooter's battery is 7Ah and I need that to power my scooter's starter motor so I cannot use that), or a portable jump-starter with a 12 volt outlet, I just need a collapsible pole and antenna, I plan to make up what is called a T2LT for this purpose.  This is inspired by others going up hills to do this, and Tan Hill makes a good place, I'm sure the Amateurs would like it too, and best of all there's a pub up there for food and drink

Update: Listening to GB3IR, the 2m repeater in Richmond, this evening (I obviously cannot transmit as I don't hold an Amateur license yet) the Amateurs that were on air have mentioned Tan Hill so they actually have used it themselves for HF work, so I am not the first nor am I the last.

The pub itself stands at 1732ft ASL, so the location is pretty much perfect for radio, especially DXing on both 27MHz and 446MHz (I may give the latter a go as well depending on how much charge is in my radios, though I can charge them up prior to the event and take spare batteries, but my aim is to try on 27MHz, as it is sat around spare and it the better of the three mobile rigs I own I will use the Midland 78+ Multi B (the TTI TCB550 is on gateway duties so won't be removed and the Moonraker FA5000 has an awful s-meter and cannot do AM, as AM is now legal and my Midland 78 Plus is type approved for use in the EU as far as I can tell it is legal to use on AM here, for the full 4-watt output on AM, it is required to put the radio into the setting for Spanish channels as these use 26.965-27.405 AM and FM at 4 watts.

My new Sony headphones and my converter will also be going with me, just for those stations I may not hear easily, laptop, maybe, though a notepad would allow me to write down callsigns, I simply need to pick up a portable power supply (a battery and volt meter may be sufficient as a temporary measure until I can get something better), a telescopic or collapsible pole, and an antenna, preferably of the T2LT type.

I may also look into picking up a President Grant II CB radio, as I hear these are very good indeed, and I've wanted a President CB radio for a while now, but until then I will just use my Midland 78+ Multi B.

One thing that I intend to do is take an SWR meter, my good quality Zetagi combo SWR and power meter will be ideal for this role, my cheaper two aren't brilliant, one has a needle that is not as precise as it should be and the other sometimes likes to stick, one of these is connected to my home antenna system for the CB gateway as the radio is also connected to it and I need to monitor if the tuner is working as it should be on occasions.

on PMR446 the antenna will be screwed into the radio, so no meters, coax, or anything else.

If I take the computer I may take the RTL-SDR and use it with another antenna, provided I don't overload it with my own transmissions.

So, I'll post an update as and when this DXpedition takes place, Tan Hill is there, I might as well use it for radio.

73 de 26CT730