putting all my RG213 to use and repairing the T2LT

With the crimp-on plugs having arrived earlier this week I set to work fitting them to the cables, starting off with the RG213, which is all now terminated and can be put to use, all of it tested into a dummy load showing no mismatch, these cables should see me through for a while, and will be used to feed antennas over the longer RG58 that came from the cut off piece of the groundplane antenna, which will receive a plug hopefully tomorrow.

The T2LT had a cut in the feedline outer jacket, I have cut this out and crimped on a new PL259 at that point, it will be tested tomorrow provided the wind dies down sufficiently, if not Wednesday, I noticed this cut during the Activate All Counties event last summer but the antenna was still working as the braid had not been compromised, just the outer jacket.

Another antenna I hope to test tomorrow if it gets completed and the wind dies down is the second dipole for 2-meters made from the metal strips found inside the rubber part of car windscreen wiper blades, the antenna is deliberately too long for 2-meters so will be cut to length in the field, it will be fed with the RG213 I have and the QYT KT8900D will be taken with me as it is less prone to pager noise than the Leixen VV-898 and once the SWR meter is removed the HTs may be damaged having a heavy coax connected to them, and should this antenna work it will be my go-to portable ops antenna, for campsite use I'll use my copper-wire dipole as this does work fine as I have had it on the air before.

I will post results of the new dipole on YouTube and on here, the T2LT, however, I will just post on here as I know the antenna does work OK

73 de 2E0EIJ/26CT730