Yaesu FT2D has arrived

The latest addition to my collection of radios, the Yaesu FT2D, has arrived, and it seems to be a well sorted radio, I did note immediately that like my Retevis RT87 it has the female SMA connector for the antenna on the radio, again this seems to be to do with waterproofing however I do not believe the antennas are interchangeable between the two radios in any way.

The APRS is working and my local repeaters are programmed in to it, by hand as the supplied USB cable is only any good if you want to update the firmware, which I may need to do.

The radio is on its 9 hour charge, as the supplied charger is not a drop in charger, the only other HTs I have bought that did not include one are the licence-free HTs by Intek and Midland despite the Intek radios having this provision, those radios were a fraction of the cost of the FT2D so it's my only real criticism of the radio.

It works on receive fine on C4FM, TX I've not been able to test as it was at that point the battery ran out, FM transmits fine and I got a brief QSO on the local repeater with Dave G8YPN just as he got home.

So my second Yaesu radio and the day of purchase not ruined by the nasty Chance Callahan KD0MXN doing something horrible to me, nor the nasty stalker doing something, primarily because of my step-back from Twitter (infrequent tweets) and IRC (seriously reduced activity), though because the former is licensed and can use anything that uses Internet linking which are generally found on 2-meters and 70cm he could quite easily have harassed me and further stabbed me in the back, but he didn'.

I am in the process of doing the video for the radio, however that won't be completed until much later in the week.

In an unrelated note a colleague of mine gave me a wind-up broadcast receiver either as spare parts or to repair, as he had no use for it and it didn't appear to work, I've wound the crank and found that the internal battery is low on charge.

73 de 2E0EIJ

Yaesu FT2D now ordered

The main handheld I've been after since getting the FTM-400XDE, the Yaesu FT2D, is now on order from, you guessed it, Martin Lynch & Sons, I want to quickly thank the people that tipped me when I delivered food to them for their help in getting me to this stage, I plan to continue saving for either an FT450D or an FT991A, though preference is the latter.

I ordered some screen protectors as well as the radio is a touch screen radio, and a video will be put online when it arrives before it is taken out of the box.

It ticks these boxes for me:

• APRS on HT without extra hardware
• Yaesu System Fusion
• Superhet receiver
• Access to System Fusion out of the car without removing the FTM-400XDE

There are a few other things in the radio worth exploring which I won't cover in this post, and if it arrives before my next club visit I will certainly be taking it along with me, I will also be testing it with the Jumbospot, which at home is solely used for DMR at present, it only gets YSF use in the car.

As I ordered the radio before 2pm it should arrive before Wednesday if all goes according to plan, and if I am on a day shift Wednesday, or even off that day, I should be able to get to the club with it.

I will post more on the radio when it arrives, it's been a long time coming for my first decent HT.

73 de 2E0EIJ

The Yaesu FT2D could be coming to the 2E0EIJ shack very soon

As is known, I run a Yaesu FTM-400XDE in the car, a radio that can do both FM and Yaesu System Fusion, I've run this radio for the last 3 years with no major problems, now the prospect of the Yaesu FT2DE handheld is becoming real, at a price of £299.95, it's gone down as Yaesu are soon to release the FT3DE, which is a similar concept to the FT2D however it has a colour display and Bluetooth on board whereas the FT2D has a monochrome screen and no Bluetooth hardware, though all these radios do have APRS which is the selling point, along with YSF, for me, however the FT2D is the radio I am interested in.

I've checked my savings to date and they appear to be within reach of the £299.95 price of the FT2D, the radio will most likely be in my shack in June or July.

Currently all my 2/70 HTs are Chinese (Wouxun, Baofeng, Retevis and AnyTone) and the Baofeng units in particular have the problem of poor front-end filtering in RF-dense areas, the FT2D would be the best tool to have to do /p from the top of Blackpool Tower or just even on a big hill with the stock antenna of the radio.

So, I have until *before* the end of June in which to order and take delivery of this radio and get a video up onto YouTube, with the rate of saving I should hit the magic number and still have money in my savings account in good time, this is because of the events that will be taking me to Manchester at the back end of June and I'd like to have the radio by then.

I have the FTM-400XDE, it is time to expand my YSF abilities out of the car now and RF based APRS.

73 de 2E0EIJ

Retevis RT87: my next HT?

Now I wouldn't normally rush out to buy a radio based on a YouTube review however in this case I am tempted to after two very positive videos surrounding the Retevis RT87 by Lewis M3HHY on his 'Ringway Manchester' channel, which I watched in reverse order, the second video he did was a test on top of a local to him high spot called Werneth Low, where apparently high power transmission stations were present that should flatten the front end of any Chinese radio, particularly Baofeng radios, or even the Leixen VV-898 which I know to be terrible for this, however the video showed Lewis operating happily from the area working stations in Oldham and Stretford and other locations as well as two local repeaters, the first video being the unboxing and describing of the radio.

I found the radio on Amazon for £54 plus shipping with the data cable, the cable is needed as this radio is IP67 rated and uses a pogo-pin arrangement to make the connections (the pins are on the accessory, contacts are on the radio under a waterproof cap, my network radio has a similar connector but I believe it is not IP67 rated), otherwise I'd be spending hours programming a radio like this by hand.

So I certainly will order this radio, and put it through its paces, for £54 plus a programming cable you certainly cannot go wrong.

Probably does not work with Chirp yet so I'd have to install the Retevis software on my shack computer, it's not much different to Chirp and looks simple and easy to use compared to most Chinese radio programming software.

I'll keep you informed

73 de 2E0EIJ

Forays into DMR and the Bowburn Rally

I attended the DADARS rally in Bowburn yesterday and, despite some unforeseen roadworks on the A1(M), I found the event venue with no problem and quickly concluded, due to the antennas on the top of the building, that the club hosting the rally was based there.

Now I have a sort of tradition of buying a new radio at rallies, with me buying the GT-5 at the National Hamfest one year, and buying my QYT KT-8900D from the Blackpool rally last year I carried on that tradition by picking up the latest Chinese offering for DMR, the AnyTone AT-D868UV, a 6 watts claimed dual-band HT that can also do FM as well as DMR.

My own opinion of the audio quality of DMR has not been as favourable as that of System Fusion by Yaesu, however, for reasons I need not explain, it is the only other digital voice system I will use, I won't use D-STAR at this time, again I need not explain why.

DMR coverage in my area is, for lack of a better word, poor, but that's not to say I cannot use it, and with these dual-band radios now coming out I am pretty sure that there will be 2-meter repeaters with DMR functionality coming on air at some point, though here in the North East of England the favoured digital voice system is in fact System Fusion, for which I already have the radio for.

I am awaiting confirmation of my DMR ID and have found a codeplug that has all repeaters in the UK in it as well as a few other things that would be of use in this radio, the codeplug has been written along with the system issued DMR ID, the codeplug was supplied free of charge by Moonraker, the software was elsewhere on the Internet, the radio itself was supplied by Mirfield Electronics and I got a business card off them so I could contact them should I have any issues at all, fortunately no issues yet.

The radio keys up fine, though to actually test the DMR side I'd need something that can decode DMR, my RTL-SDRs should do this no problem, also another station with DMR equipment should be fine to give me an idea of how this radio performs on DMR a bit more fairly than an RTL-SDR

Going back to the rally, it was not too big and they did have bacon rolls (which I did have one despite having a McDonald's breakfast that morning), it was also good weather so the drive to and from the rally was in an air conditioned car, complete with a short QSO with Chris G4FZN once I got back into GB3IR's range, which I noticed was definitely a couple of S points down just as the A1 goes over the Tees, my handsfree performed well as long as I was speaking at the microphone, or at least the report I got from Chris was along those lines, I mostly monitored GB3CD until I was just past Darlington on the way back, on the way out I switched to S22 (for the talk in though it didn't seem to be in operation) once out of GB3IR's range (with the control panel for the FTM-400XDE in the centre of the car dash this was achieved easy.  The rally came up in my QSO with Chris and I was surprised he was not there, however he obviously had other things to do that day.

The rally was worth the visit, not too busy and had a raffle and tombola, I didn't win anything but there's always the National Hamfest in September, but that's another story entirely, plenty of stalls at the rally, and plenty of radio gear up for grabs, I had a choice between a Bluetooth microphone for my KT-8900D or the DMR, I chose the DMR in the end as in the shack I don't really need a Bluetooth microphone.

Now time to play with the DMR, see what it can do (and if it is a "Motorola killer", I have heard plenty of DMR users are set in their ways and use Motorola MotoTRBO equipment)

73 de 2E0EIJ

Amateur satellite

After watching a segment of episode 12 of TX Factor about operating through satellites I thought I would give this a go myself as all I need to do this is a suitable dual-band HT, as all mine are Chinese one would think they wouldn't be suited, as they can do what the offerings from the big names can do then they are fine for the purpose.

The satellite I am interested in, and as noted on the TX Factor episode referred to above, is SO-50, as it has an FM transponder, with uplink on 2-metres and downlink on 70cm, as it would be massively impractical to use the -600kHz split on a satellite due to the size of the cavity filters used at 2-meter repeater sites that achieve this so the signal goes up on 2-metres and comes back down on 70cm, but it isn't that straightforward as the Doppler effect has to be compensated for, programming the HT with the frequencies for the satellite beforehand will save you trouble here, the frequencies for SO-50 and other Amateur satellites are available on the Internet.

Knowing when the satellite is to pass is another thing you need to know, I have already gone ahead and downloaded two pieces of software for this purpose, on my Android phone I have AmsatDroid Free, and for my laptop I have Orbitron, the latter software being mentioned in the same TX Factor episode noted above, and this runs fine on Windows 10, so now I know where SO-50 is at any given time the next bit requires I be able to transmit from my HT through the satellite and my HT's rubber duck antenna simply will not do, for this a Yagi is the best antenna to use, but it needs to be of a design that will work on both bands, the most popular antenna appears to be the "Arrow" antenna, the original of which is actually made from arrows for the antenna elements, and because we're doing cross-band operation we also need a diplexer (this is correct, it is not "duplexer"), which from what I can tell is simply two passband filters, one high-pass for 70cm and one low-pass for 2-metres.

The Arrow antennas are not cheap, so in the spirit of Amateur radio it makes perfect sense to build one using bits from the junk box, and from a DIY store (B & Q in my case as it is the closest one to the home QTH), and I like to build rather than buy antennas where I can to save money, and considering that one may simply use their arm to move the antenna with the satellite it needs to be lightweight, wood for the boom would work well here, but if you do use wood it should be varnished to protect it should you be out on that hilltop and the heavens open, waterproofing the coax connections is also advised.

Once you have all the information regarding your chosen satellite, an antenna, a programmed HT, go out and make some contacts, but be aware that satellite QSOs through SO-50 are similar to contesting, usually callsign, location (locator square) and signal reports as the satellite passes for a short duration and is often very busy, listening before keying up is well advised, as is the use of headphones so you can hear the satellite better, also run the radio with an open squelch.

As a foundation license holder I am restricted to 10 watts, as is anyone with a foundation licence, antenna gain may push your actual radiated power beyond this level so dropping the radio to a lower power setting may keep the foundation licencee within their power limits and still legally use the satellite, gain and other such factors are beyond the scope of this blog, and from what I understand SO-50 doesn't need more than 10 watts anyway into it and by the time the signal gets there it probably falls well below that.

Having a second person on hand to assist with the operation may also be a good thing, as they are not transmitting they do not need to be licensed, adding a second pair of headphones for the assistant to help with logging may be a good thing too, the assistant can also help position the antenna leaving you free to carry out the QSOs.

And finally, building the antenna simply requires a search on Google as there is a lot of information on the subject and many designs are available, and you could further this and build the diplexer as commercial ones are about £30+ depending on where you go, and you get the pleasure of building the entire thing yourself if you do, and save money.

I look forward to working some stations through a satellite very soon, just got to get the festive season out of the way first.

73 de M6RSQ

Another Baofeng DMR?

With the DM-5R now being confirmed as a real radio and examples of it out there in the wild and a US$10 upgrade to make it work with Tier 2, it seems Baofeng may be releasing another DMR that will work with Tier 2 out of the box, the DMR-82UV, again dual-band, based on a UV-82, which in turn forms the basis of the GT-5.

Again this information was found on Delboy's radio blog and he had found it in turn on an external site that he had to translate from Google, the site showed a picture of a pair of these HTs, showing a vastly different display to the rest of the Baofeng range, though to me it looks much the same as a stock UV-82, though a stock UV-82 has the UV-5R display in it.

Price? Well early reports suggest less than €100, this is from Delboy's source, this one seems like a more viable alternative than the DM-5R but I would consider buying both to see how they fair, all Baofeng HTs are generally cheap, and both these are likely to get you onto DMR for sub-£100, however I still maintain the best one to go for is the well established TYT MD-380 (or the newer MD-390), though it is 70cm only whereas the Baofeng HTs are dual-band though I do not know if any DMR activity takes place on 2-metres here in the UK, though these HTs can do FM as well so all is not lost.

I suspect that as time progresses with Baofeng DMRs is that they will become popular with those wanting to use DMR and cheaply, I maintain my position as being more of a fan of System Fusion as it sounds better, is less of a hassle to set up for both repeater and station side, and it coexists with FM much better due to the AMS on the current available radios for it (all Yaesu of course but maybe one day a radio will come along by someone else that works with it), though I do want to play a little with DMR to see what's what with it, I still maintain an aversion to D-STAR to keep out of the way of Chance Callahan KD0MXN until the FCC do something about his many breaches of Part 97 of which they are aware of.

Well on this latest development from Baofeng I will let it play much like I let the DM-5R saga run it's course and I will post any notable updates

73 de M6RSQ

Baofeng DM-5R, evidence beginning to circulate around the Internet suggesting it is a real radio

Having had a search across the Internet to try and get to the bottom of the whole DM-5R saga I have found information across the Internet suggesting it exists, a Dutch Amateur operator put up an unboxing video on to YouTube and a British person had ordered one to find out if it was indeed real or not, something I will be following up in the next few days.

It is beginning to look like it in fact does exist and Baofeng have made it, however I don't feel foolish for dismissing its existence because it looks so much like a UV-5R to be believable, most DMRs have a larger display, not the sort seen on the UV-5R, the radio is not of much use to me until of course it supports Tier 2, sure I could use analogue but I would be better off just buying another HT, which I did anyway with the GT-5 to replace my UV-5RC Plus, happily as the DM-5R is so much similar to the UV-5R I can theoretically use my battery eliminator on it and swap the battery to the UV-5RC Plus, I plan only to order this radio when the firmware is modified to support Tier 2, this could be a while.

So, it looks to me like this radio may well be real after all.

73 de M6RSQ

Update: YouTube user 'Ringway Manchester' has got hold of this radio, he has done an unboxing and also gone through the radio's menus, there are DMR related items in the menus, I am satisfied this radio exists, thus closing the saga of the Baofeng DM-5R, I will wait for the firmware to support Tier 2 before placing an order, as it is not really much use to me as Tier 1

The saga of the "non-existent" Baofeng DM-5R continues

Indeed it does, it is still advertised for sale on Radioddity, and the price has gone down to US$69.99 at time of writing and there are now "photos" of not only the radio but the contents of the box, and the radio is advertised as being only compliant with DMR Tier 1 rather than both Teir 1 and 2 as before.

I am beginning to think Radioddity are trying their hardest to convince people that this radio is real and to part with money, I have seen no evidence on other websites or YouTube that it exists, the most I found was a video of someone here in the UK finding the radio on QRZ Now and also believing it to be fake, until I see a working example in the hands of the Amateur radio community and they are not affiliated with Radioddity or QRZ Now then I will be satisfied that the radio exists, I don't imagine Baofeng would ever build a DMR into the same case as a UV-5R, and I know Wouxun have released a DMR, but I still stand by what I said about if you want a cheap DMR at this time, buy the TYT MD-380, and although I like System Fusion over the other digital systems I don't mind playing with the others (except D-STAR due to its use by Chance Callahan KD0MXN until of course the FCC revoke his licence for his many breaches of part 97) just to see how they fair over System Fusion, though I have already heard audio from both DMR and System Fusion and consider Fusion to sound better,

Anyway, I also stand by that if the radio is real there will be one in my shack, once they support Teir 2 as it would not really be good otherwise for a Teir 1 only radio when the competition already support Teir 2 along with the Motorola gear that DMR is compatible with (it's essentially MOTOTRBO).

Curiously, Baofeng is NOT listed as a manufacturer on the DMR Association website either, further making me believe the radio is fake.

73 de M6RSQ

National Hamfest 2016... post Hamfest

So the National Hamfest is done for another year, and I did not come back empty handed, to replace my Baofeng UV-5RC Plus (as the battery keeps falling off it and for that reason I'm converting it to be used as an APRS radio as I can simply strap the battery on with a rubber band and deactivate the keypad) I picked up another Baofeng, this time a Pofung (Baofeng's newer name) GT-5, a radio that has a unique feature, two PTT buttons, one for each frequency/preset displayed), the RSGB Radio Communications Handbook for £20 with a free backpack, the last one they had too, a free cap off Yaesu (who were in attendance and me being me forgot to ask them about any upcoming improvements to System Fusion, and a LED badge (with blue LEDs) that I programmed with my callsign initially by hand, but since returning home I've managed to program it using the computer so it shows my callsign and name.

The GT-5 radio had charge in it out of the box, it did also come with a 2-pin EU plug rather than a 3-pin UK charger plug but there was an adaptor provided to allow it to plug in, though I've not connected the charger up.

What I did note is that the ARRL (the American Amateur radio organisation) were there, their membership was £60 for one year, and being an American organisation I'd have had to pay that out in one go if I were to join them, trouble is is that Chance Callahan KD0MXN is a member of ARRL and thus receives their QST magazine, which I suspect they publish a list of new joining members in much like RSGB do in RadCom, and if my callsign appeared in there then he would again accuse me of stalking owing to his delusional beliefs about me and possibly attempt to have me ousted from the hobby as soon as possible, it is for this reason and the £60 fee that put me off signing up for a membership of the ARRL, though I may consider it if the FCC finally revoke KD0MXN once and for all after my reports to them earlier this year and several reports to them since then.

Also in attendance were Ofcom, much to my surprise, I decided not to bother them and keep out of their way, perhaps they wanted to advise on their new licencing portal, which I am not a big fan of but find it works OK.

The traders present were otherwise consistent with last year, the GT-5 was purchased from Moonraker as they had them and several other Baofeng radios (including the Intek brand one that can do 8 watts) for a reduced price, I picked the GT-5 as it seemed rugged over the GT-3 and most other UV-5R derivatives.

So, what else to report? Nothing really, another great Hamfest and I plan to do it again next year, perhaps with a little more money to spend

73 de M6RSQ

Ooops...

Well, the possibly fictitious Baofeng DM-5R apparently has a problem...

Delboy has reported on his radio blog that customers who have ordered this radio have received an email saying the supplied firmware has a bug that makes upgrading it for Tier II (which I believe is needed for DMR repeaters) may brick the radio requiring it be sent back to Baofeng for repair.

They offer the option for the customer to wait until the firmware bug has been ironed out, as well as the option to receive the radio as-is and cancel the order, needless to say I have not ordered it as I don't trust I'll get a radio as it just looks far too much like a standard UV-5R just with all the buttons coloured black except the side button above the PTT.

Sooo... I'm still not convinced it is a real radio, and Radioddity aren't convincing me either, again if it is real it will be on my YouTube and also the video will be here, I will be keeping a very close eye on this, new radios coming to the market often pass me by but this one stuck out like a sore thumb, probably because it's reportedly DMR, but also because there is the possibility it isn't real.

Maybe I'll be proven wrong in the next month or two, maybe I'll be proven right.


73 de M6RSQ

Baofeng DM-5R, the plot thickens

The price of the supposed Baofeng DM-5R has gone up in the last few days at Radioddity according to Delboy's Radio Blog  since "launch" to around the US$90 mark ($89.99 in fact), still cheaper than the well established TYT UHF DMR handheld that is known to exist.

This still does not make me believe the radio is real though, until I see a working model online, even in the hands of Simon The Wizard or Dave M0OGY as the both of them I regard with anything to do with radios, I also have regard for Delboy as he is an active member of a lot of radio forums.

Once I know the radio to be real I should have one in the shack, and then upgraded for Tier 2 so it would work with DMR repeaters (none in my locale though because of complicated reasons) as well as properly registered for use on the DMR systems, though my initial tests will probably be into a dummy load with an RTL-SDR doing the RX and decode.

73 de M6RSQ

UPDATE: At the time of writing this they are, ironically, out of stock, perhaps they are out of stock because the product does not exist? Who knows? In the next week or so we'll find out.

A bit of radio activity this afternoon

I took a drive up to my usual radio playground at the top of the hill, my intent was some more System Fusion activity and another go on WIRES-X, sadly this did not work in my favour as no one answered my simplex or repeater calls on System Fusion nor did I get to play with WIRES-X as it was down on GB3CD and the second nearest WIRES-X node is in Middlesbrough and I’m unable to hit it from my location on 5 watts.

I made the spur of the moment decision to drive to Tan Hill, of course avoiding all the sheep that like to casually walk into the road without a care in the world, I approached it from the other side after going across the A66 and back down, I could hear GB3AS in Carlisle from Tan Hill no problem but I could not get into it with my 5 watts, I tried more calls simplex on 2-metres both digital and FM but no luck, guess today was not as lucky as last time I went out to play radio, hopefully WIRES-X will be working again on GB3CD soon.

Before I set off I reprogrammed my HTs a little, clearing out repeaters I’d not likely use anytime soon, currently programmed are all my local repeaters and GB3LM in time for the Hamfest as I should be able to hit that with a HT at 5 watts from the Newark showground as it is situated on the roof of Lincoln Cathedral, this repeater is a System Fusion repeater and as I have the corresponding radio I should be able to use it in both modes while I drive down but once at Newark I’ll obviously switch to analogue-only operation as I’ll be wanting to look around the hamfest, but I understand that due to it’s location it does not have WIRES-X like GB3CD, it’s 70cm sister, GB3LS, does have IRLP and Echolink but may not work from Newark.

Hopefully when I next play radio from a hill I’ll have more luck, I suspect I’ll need to get my CRT SS9900 working to do some 10-metre operating as I’ve yet to operate on that band since buying the radio, or even think about buying a 2-metre SSB set at the Hamfest for the right price, and make up a beam antenna.

 

73 de M6RSQ

System Fusion

As you may have worked out from some of my previous posts I am interested in making the step to System Fusion (Yaesu's C4FM digital voice system), and have had my eye on the Yaesu mobile rigs capable of this for some time, notably the FTM-100DE and it's more expensive sibling the FTM-400DE (now the FTM-400XDE), along with this as I plan to use the radio mobile no matter which one I get I will replace the mobile antenna with one of a better design, the current one, though fine for TX on 2m/70cm is not brilliant and was only meant as a stop-gap for my previous car until I could get a larger antenna, it's quality is showing with the Baofeng on the other end though it still transmits fine but I really don't want this for System Fusion,

So, a trip to an Amateur radio store is in order, but my current car has already thrown a spanner in the works by virtue of a damaged tyre that I have to get fixed, though I am already on to sorting that out and it should be done by Tuesday (with a swap of the spare to the opposite wheel) thus enabling me to go to the Amateur radio store of choice and see what they can do for me (if I can pay off the cost of the rig over a period of a few months I will be able to take one home with an antenna and an external speaker).

Not only am I interested in operating on C4FM with one of these rigs I am also interested in APRS as these rigs feature it, though from what I currently understand (though I could be wrong) is that the APRS does not transmit and allow voice transmission at the same time on the FTM-100DE meaning I would need the more expensive FTM-400XDE to do this as I'd like to keep up with the APRS side which I've not had chance to use for a while.

Anyway, I shall let you know how I get on and if I become the owner of one of the above mentioned Yaesu rigs, once it's in the car I should then be heard on System Fusion, there are at least 3 other club members so equipped for it, I might just be joining them soon

73 de M6RSQ

Blackpool rally

In light of missing the Ripon Rally due to family commitments I made the journey over to Blackpool for the rally there, was bigger than I thought it would be but worth the trip to see what these things are all about.

The journey was fine until I approached and entered Cumbria, wherein the weather took a turn for the worse, this continued onto the M6 through Lancashire, getting better the closer to Blackpool I got,

On arrival at the venue I was spending a lot of time parking my car as there were no spots available, eventually one became available and £5 later I was in the venue, which had the vast majority of the clubs from the North West in attendance along with various sellers of amateur radio equipment, along with used equipment stands, and the RSGB, selling books and offering membership, which I took out and got a free Baofeng BF-888S UHF as well as the latest RadCom (which I shall take along to the club in case anyone wants to read it that is not a member

I was hoping to pick up a 2/70 mobile or base unit, used of course, for home that I could run on the slim-jim or some other homebrew antenna that could potentially cover both bands, I'll keep an eye out for cheap, yet still serviceable, radios for that purpose on the Internet.

So. to sum up the Blackpool rally, a good day out, but get there very early if you want a parking spot, I certainly plan to go next year but only if the weather wasn't as terrible for driving as this time.


73 de M6RSQ

Leixen VV-898 compact mobile VHF/UHF radio

I became aware of a gem of a radio on the Charlie Tango forums, the Leixen VV-898, this radio is extremely compact so will fit in the smallest of spaces in the smallest of cars, and it is perfect for the foundation license holder in that it is maximum power of 10 watts.

Originally I was going to use my Wouxun in the car, however after seeing this rig it meant I could have something a little more permanent, the theory is that I should be able to use this radio to get into GB3IR from a little further away, this is in part due to my Wouxun only putting out 5 watts on VHF and 4 watts on UHF, my recently acquired Baofeng is similar in this regard.

Wiring this new rig into the car should not be that difficult, it wasn't for the CB though the power cables were too short, so I don't see any major issue with this rig, I will more than likely need some new reels of wire from Halfords though.

This rig retails at less than £100, Moonraker sell it for £99 give or take, Martin Lynch & Sons sell it for £90 with a programming cable or £80 without, though to be honest the story is always the same with all these Chinese radios, buy a programming cable.

This radio, like all the Chinese made VHF/UHF radios, can transmit on the PMR446 frequencies with the correct steps, but you do this at your own risk, I take no responsibility for illegal use of radio equipment.

With two weeks left to go before my foundation exam (yes, it's two weeks today) I have decided that once I pass (which I have every confidence that I will) I will get this rig ordered the same day, installed by the following weekend, with the antenna SWR check done at Whashton Road car park as per my usual routine for setting up mobile rigs, unless the proximity to GB3IR causes problems, which it should not do, or I have not received the needed information from RSGB before that date to get my license from Ofcom, I have, however, found out that these radios, or at least more recent ones, are equipped with a BNC connector as opposed to an SO239, this means an adaptor will be needed, but I can deal with that when I need to.

I will post a quick video to YouTube as well

Another rig to show up for me soon will be the Anytone AT6666 as I plan to order one of these when I get paid next week, probably with another YouTube video as well.


73 de 26CT730